When I'm trying to open Ansys it's stopping on the "Initializing project" step and drops opening.
Might be due to some issue in installation. Can you try opening associated applications(eg. Fluent/ CFD-Post)?
subhamdas, yes, I can open Fluent as well as Viewer.
A similar problem was addressed here. Check if this helps!
subhamdas, I found these instructions:
"Close all open Ansys Applications.
Open windows file explorer
In the address path bar copy and paste the following text:
Rename the v191 directory to v191_old."
but copying and pasting the following text doesn't have any result
That was for v19.1, try this command in the CMD Prompt instead
move "%appdata%\ansys" "%appdata%\ansys.old"
Can you check the Windows Event Viewer as described in the post in the link above to see there is any event recorded when it crashes ?
Do you have an install.err file under (default location) C:\Program Files\ANSYS Inc or C:\Program Files\ANSYS Inc\ANSYS Student
if so, please post its content.
Another thing to try is to temporarily disabling the firewall and anti-virus on the machine. If it helps, you can turn them back on but add the appropriate exclusions.
Ansys customers with active commercial software licenses can access the
customer portal and submit support questions. You will need your active account number to register.