I created a 2-D Maxwell motor and wanted to analyze it, but the error code:
Part "Region": Faces of sheet is not on XY plane
The Region being below
As far as I know it should in XY plane. If it is not in XY plane, it will throw error.
Please make sure that your 2D geometry is in XY plane only.
Please see help manual for more details about these commands.
Guidelines for Posting on Ansys Learning Forum
How to access ANSYS help links
How do I make sure it's in the XY plane? I checked the global coordinate system and it didn't have any issues.
Let Maxwell expert pitch in
As a preliminary check, change the orientation to left or right and see if you are seeing anything out of the plane.
Take a look at the below example.
If everything is in XY plan you should see the screen as shown below
I've checked, and everything seems fine
But the issue persists
Can you help me understand how you created this 2D model.
Created from RMxprt (or) Imported a dxf file (or) Created from a imported 3D model?
Ansys customers with active commercial software licenses can access the
customer portal and submit support questions. You will need your active account number to register.