I need to do Transient thermal electrical analysis, can it done in Ansys Workbench.
Yes, but we need to add a apdl command snippet to the thermal electric system in Workbench.
The command used is:
antype,4 ! transient
See these commands for more info
All the best
Thank you for your reply
but the model cant solve
can you tell me where is the problem
Thanks in Advance
He recommends 2 commands, but you use more and type it wrong
Repair them you will get result.
Change commands as he recommended.
You will get result
Could the reason be the capabilities of my pc
Hi @Pukmester - you are not following ahat @AnPham says - so use only this:
So remove /SOLU not needed and you can not use SOLVE command again since Mech. will be solving anyhow.
If you still get an error - go to Solution Information and in the Solver Output and find the error (ctrl+f and search for error). Post the error message in this discussion.
Ansys customers with active commercial software licenses can access the customer portal and submit support questions. You will need your active account number to register.