Need tutorial files for simulation in forte

rkgupta369rkgupta369 Mumbai, indiaMember

Hello,

everyone, i want to form a simulation on DI diesel engine for my course project in my college. For this purpose, i wanted to learn simulation in ANSYS Forte. i got the file in which tutorials steps are given, but file "(demo_eng.x_t and lift.prof)" used in the simulation are available for their licensed customers.

   I am requesting to all license user that if you have 5-10 mins of your time. then please send me this file on my email at [email protected]

it would hard affect you, but to me it would be a life save

To access tutorials and their input files on the ANSYS Customer Portal, go to
http://support.ansys.com/training.

I would really appreciate any help from this community.

Comments

  • Garrystone123Garrystone123 Member
    edited January 2018

     Hi rkgupta369, did you manage to locate these files? I need them also for the Ansys Forte simulation.

    Please send them to [email protected] if you have them.

    Thanks

    Garry

  • raul.raghavraul.raghav Bethlehem, PAMember
    edited August 2018

    The zip file consists of the following input files: 

    demo_eng.x_t , lift.prof,tut_port.x_t , tut_gdi_comb.x_t ,comb_lift.prof, footprint.txt, massflowrate.csv, and velocity-0.7cd.csv

    These files that can help you do the following tutorials:

    (1) Solving a Cold Flow Simulation in IC Engine(Fluent) System: demo_eng.x_t , lift.prof

    (2) Solving a Port Flow Simulation in IC Engine (Fluent) System: tut_port.x_t

    (3) Solving a Gasoline Direct Injection Engine Simulation in IC Engine (Fluent) System: tut_gdi_comb.x_t ,comb_lift.prof, footprint.txt, massflowrate.csv, and velocity-0.7cd.csv

    Refer to the following links for tutorials on IC engines:

    Ansys How To Videos: ANSYS Internal Combustion Engine (ICE)

    Ansys Internal Combustion Engines

    Tutorial: Solving a Cold Flow Simulation

    The zip file consists of the following input files: 

    demo_eng.x_t , lift.prof,tut_port.x_t , tut_gdi_comb.x_t ,comb_lift.prof, footprint.txt, massflowrate.csv, and velocity-0.7cd.csv

     

    Note: It is against the rules of the community to share tutorial files. The zip file attached herein were downloaded from various websites online and just put together. As a suggestion, provide an email id here and if someone has the files, they can help you with it.

  • BidyankaBidyanka Member
    edited April 2018

    Hello Rahul sir. I'm a B.Tech final year student. I'm trying to form a simulation of SI engine in ansys forte and was wondering if the files provided by you in the above attached zip file are going to work in SI engine as the actual post was regarding diesel engine. In case we need different files for SI engine, can you please provide me with those files. Please send the files at [email protected]

     

    Thank you.

  • Inzamam31Inzamam31 Member
    edited April 2018

    Hello Rahul sir, I am Inzamam Ul Hussain a final year Btech Mechanical student. Where I can find the SI engine full simulation for ansys forte? Please provide me the files or links at [email protected] Thank you sir.

  • raul.raghavraul.raghav Bethlehem, PAMember
    edited April 2018

    Inzamam, you can call me Rahul. Don't have to be formal .

    My first post in this discussion has been updated. You can find the tutorials and the corresponding files from the post.

  • Inzamam31Inzamam31 Member
    edited May 2018

    Actually i forgot to mention about the combustion of SI engine. I am not being able to find any files for SI engine combustion simulation for ansys forte. So if you have the files or you can provide me the links, then please send me at e-mail address. Your help is really appreciated.

  • JuancitoJuancito Member
    edited May 2018

    Hello Raul, I would need those files. You could send them to me?

    Thanks!!

  • sridharsahoo366@iitkgp.ac.in[email protected] IndiaMember
    edited June 2018

    Hey are you using ansys Forte for simulating ic engine problems ?

    Hello Rahul, do you work in ansys forte. I am working in ansys forte and facing many problems in modelling. 

    If you have time we can discuss some of the challenges that m facing. 

    please mail me if you do [email protected]

     

  • sanusisanusi Member
    edited June 2018

    @raul.raghaz please I need support files for the ci engine combustion simulation on fuent I have tried all the files u supplied here but it wasn't working. I specifically need combustion profile file, the chem rxn, therm file. Will very glad if I can get this files as I'm in a critical need of it.

    Thank you all for your contributions, assist is not limited to anyone my email is [email protected]

    regards to all

  • raul.raghavraul.raghav Bethlehem, PAMember
    edited June 2018

    Unfortunately, its against the rules of the forum to share tutorial files. Additionally, the zip file attached in the post above where files that were downloaded from various websites online.

    As a suggestion, you can provide your email id and someone who has the files can help you with it.

  • sanusisanusi Member
    edited June 2018

    Thank you so much my email is [email protected]

  • sanusisanusi Member
    edited July 2018

    Hello every one, hope we all doing great?

    I have some challenges in specifying my desired compression ratio for the ci engine simulation, how can I go through this?

     

  • sanusisanusi Member
    edited August 2018

    Hello guys, please how is it to obtain the emission parameter result from any ic engine simulation?

  • DrAmineDrAmine GermanyForum Coordinator
    edited August 2018

    Please start a new thread and elaborate more on your question.

  • edited October 2018

    @raul.raghaz Could you send tutorial files to me ?

    [email protected]

    (demo_eng.x_t , lift.prof,tut_port.x_t , tut_gdi_comb.x_t ,comb_lift.prof, footprint.txt, massflowrate.csv, and velocity-0.7cd.csv)

    Best regards.

  • KremellaKremella Admin
    edited October 2018

    Hello,

    Please post your questions in a new thread. You will get more visibility this way. 

    Thank you.

    Best Regards,

    Karthik

  • sanusisanusi Member
    edited October 2018

    hello, please how do i go about it?

  • sanusisanusi Member
    edited October 2018

    thank you so much. but how do i go about that?

  • KremellaKremella Admin
    edited October 2018

    Hello Sanusi,

    Please create a new thread to ask your question. It will improve the visibility of your question on this community. In addition, please elaborate on the exact nature of challenges you are facing during the compression stroke. Please help us understand your question better.

    Thank you for your cooperation.

    Best Regards,

    Karthik

  • PhilipadebayoPhilipadebayo NigeriaMember
    edited November 2018
    Pls if you have the demo files, kindly send to my email [email protected]

    Thank you
Sign In or Register to comment.