I am modeling non linear concrete and want to use drucker prager model. I am very confused how to get these values. Please help me. Compressive strength of concrete is 3940 psi. Thanks in advance.
I would refer you to Section 4.9.5 of the MAPDL Material Reference Guide on a full description of Drucker Prager Concrete model with all the options available for the basic DP model and corresponding hardening and softening behaviors after yielding. You can also refer to the MAPDL documentation on command TB,concrete,,,,DP and the corresponding TBDATA command. These are the commands that are saved to the ds.dat file in the Mechanical Solver directory. The screen shot that you are showing implies that you have softening data, but you only mentioned the material strength in compression. Do you know how this material will behave after yielding? If not, you do not need to include this additional information. The code will assume elastic perfectly plastic behavior with no modification of the original yield surface. If hardening and/or softening is important, then additional testing would be required to determine these parameters.
If you had made any research on material modellign you might get them by now, Many of the best papers in good journals often given them for free if u have acess them. if you are only intrested in filling the missign values, please go through the follwing journal paper
Ansys customers with active commercial software licenses can access the customer portal and submit support questions. You will need your active account number to register.