Need to help with dimension and changes, since it seems I am not able to do diff. in SpaceClaim 19.2
Hello, so this is the link and this link is your work, but I have a problem to create
and here is my problem and I am describing it!
Unfortunately, this hole is not possible to move any way at all!
Comments
So the question is what to do in order to let the hole to be at 31 mm and not 27.2 mm. Thanks for you ideas, since I do not know why I cannot do it at all!
And I can also say that it does not allow to associate the hole with the distance...
Please use the Attach button to upload the .scdoc file so I can have the same file you are trying to modify.
Also, delete the other Discussion on the same topic and just use this one.
So it seems to me that I do not know know, how to put the work of mazac-oleje-06-4, because here now I do not know how to give it to you. I am unfortunately crazy! So could you help me a bit to use it correctly.
Thanks
It does not allow me to put here the model at all!!!
If you put the file inside a .zip file, that file type is allowed.
OK, I will do it. Thanks
Not at all, you cannot use .zip file there at all. So I need to know how to change the file type to something else and than to do it like this...
So how can I give it to you? This is the question?
So if I change the file type, it does not accept it at all.
But I know that I have given it before, but now this is a problem, very nice...
So I have put it there:
https://studentcommunity.ansys.com/thread/need-to-help-with-dimension-and-changes-since-it-seems-i-am-not-able-to-do-diff-in-spaceclaim-19-2/
Thanks for understanding
And this conversation has the file as well at: https://studentcommunity.ansys.com/thread/need-to-help-with-dimension-and-changes-since-it-seems-i-am-not-able-to-do-diff-in-spaceclaim-19-2-1/ - the second comment Thanks
I did some research on how to use the Measure tool during a Move. Here is the reference I found useful.
Here is the silent movie (I don't have a microphone on this computer) of the 1 minute 10 second operation.
Till now I see that I should not have any problem, but I will try it later on and will let you know.
But thanks, this is amazing...
So now it works, the only huge problem is to change the system to the one I need, like you have the one at 0
2 min at your video. But it works, but have a different coordinate system, which is not correct at all, but do not know how to change it!
So basically you change the coord system with the line between the two circles, but it does not work for me, unfortunately.
While the Move tool is active, you first click on the Arrow icon on the left side of the Graphics window, which is the feature in the Move tool that lets you set a direction, then click on the line. That will reorient the coord system. You can drag the Triad using its origin and drop it on the hole to move. Then you click on the Triad axis to select one axis for the move, then click on the popup measurement button, then click on the center hole to set the base point for the measurement then you can type in 31 mm.
Ok, I will try to do it. Thanks a lot.
So I have to say THANKS A LOT, because you made it absolutely well and it worked, amazing!!!