Exceeding an internal amplitude limit in the solver.

hi peteroznewman 

First of all I simplified my geometry on spaceclaim and created the contact between each shell of the tank and then I applied my loads normally I have a weight force that is applied on the bottom of the tank as well as recesses.

but the calculation doesn't work, I looked at the contact and it is well defined, I don't know what my problem is.

thank you


  • Gary_SGary_S Forum Coordinator

    The message generally means that the model is not constrained.

    Try a simple analysis with fixed supports(s) and gravity to make sure all contacts are working as expected.

Sign In or Register to comment.