Karthik R
Administrator

Hello,


You should be able to use External Data Transfer to superimpose your pressure field and get the Harmonic Response. Please see the following video from SimuTech Group (an Ansys Channel Partner), which talks about how to bring stress into Mechanical using External Data Transfer.


https://www.simutechgroup.com/tips-and-tricks/fea-videos/382-ansys-workbench-fea-tips-tricks-mapping-stresses


Also, please have a look at the following post on Student Community. This should give you someplace to start with.


https://studentcommunity.ansys.com/thread/harmonic-response-pressure-mapping/


Hope this helps.


Best,


Karthik