icellb1
Ansys Employee
nWe are not allowed to click on non-displaying images, next time please choose attach image rather than attach file. nFrom your description, I think you probably assigned 1mohm and 200ohm to R in the winding window. In order to make InducedVoltage(winding2)=600*(10/3) = 180V, try the following. First, change 1mohm to 0.01 uohm for primary winding. At the same time, make the secondary winding open (set I=0 or set R to a very large number 200 ohm is not large enough).n
You are navigating away from the AIS Discovery experience