Good morning Peter nHope you are doing alright.n
As you can see on the above image, the angle for the Z axis is also 0. This is what i did. nCreated a remote point on the tip of the end effector at (.065, 0, 0)nApply Flexible rotation probe using the remote point. nAm i missing a step, ?.Thank you in advance, Petern
As you can see on the above image, the angle for the Z axis is also 0. This is what i did. nCreated a remote point on the tip of the end effector at (.065, 0, 0)nApply Flexible rotation probe using the remote point. nAm i missing a step, ?.Thank you in advance, Petern
You are navigating away from the AIS Discovery experience