I am initialising using the Boundary Conditions at the Farfield. I saw that if I initialise using the wall, the wall temperature is 1K for initialisation. nThe other temperature, to my understanding, is the external radiation temperature, which I assumed to be 0 K. This is of course not correct but a simplification I chose.nIs there a way in whcih I can initialize my model with a sepecific wall temperature? Or any other way to make this work?nThanks alot!n
Please Login to Report Topic
Please Login to Share Feed
New Post - Reply To: UDF which defines the surfaces temperature as a function of the surface heat flux?
You are navigating away from the AIS Discovery experience