kaitova
Subscriber
Hi, thank you very much, for working and writing at 3 am in the morning!nThis part is end of the pipe connection that is on the reel, see picture below.nOne way to address this is to put more parts in the model so that you can apply known loads to those added parts, and let ANSYS transfer those known loads through the added parts to the part you show above. --- This is out of plane load due to shackle rotation (from my understanding). The issue here that part is modeled with fixed end while in the reality it is not fixed while the remote force is acting. The other issue here is that part starts to yield due to the reaction force or it yields in the contact area between the yield and plastic .nnn