benlolzcome
Subscriber
There's 2 times i opened, the most recent one is on the date of this comment when i turn off firewall and opened design modeler only, and the same problem persist.nCoreEvents log@4/12/2020nEvent log opened 4/12/2020 2:49:34 PM Malay Peninsula Standard TimennProduct version: 2020 R2nBuild version: 20.2.0.2020052616nn{4/12/2020 2:50:15 PM} [ProjectReplaced:Project] A new project has been created.nn{4/12/2020 2:53:21 PM} [GeomEditorAbnormalClose:DMAddin] The geometry editor was closed abnormally.nThe geometry editor was closed abnormally.nnnEvent log closed 4/12/2020 2:53:42 PM Malay Peninsula Standard TimeUiEvents log@4/12/2020nEvent log opened 4/12/2020 2:49:38 PM Malay Peninsula Standard TimennProduct version: 2020 R2nBuild version: 20.2.0.2020052616nn{4/12/2020 2:53:21 PM} [GeomEditorAbnormalClose:DMAddin] The geometry editor was closed abnormally.nThe geometry editor was closed abnormally.nn{4/12/2020 2:53:21 PM} [GeomEditorAbnormalClose:DMAddin] The geometry editor was closed abnormally.nThe geometry editor was closed abnormally.nnnEvent log closed 4/12/2020 2:53:41 PM Malay Peninsula Standard TimennnThe other time was before disabling firewall and there's a lot so I'm posing screenshot here.nnand event viewer also gave me lots of errors at administrative events. although i im using admin acc to do thisn