omidrastkhiz
Subscriber
This is 1/8 of the stator of the direct drive generator, nWe put the segment on 4 legs, ( which is actually a few spring in each leg in Z direction ), we also add a shaker with sound underneath which is not relevant for now,nMy question is how to model the boundary condition for this structure? in X and Y direction we fixed with 4 brackets it which means there is no displacement in this two direction for each leg, I did not draw it brackets here, nI can set no displacement for X and Y direction around for legs but How I define boundary condition in z direction because of spring?.Thank you so much for the response and Happy New Yearn