Zander101
Subscriber
Configuring default RSM and ARC Port numbers for 21.1 ...Done!nUser has Administrator privilegesn----------------------------------------------------------------------------------Error creating shortcut: Product is not installed under unified build location or the content under commonfiles/globalsettings/relinfo.xml is empty, Ansys start menu Shortcut append revision cannot be determined.nRunning C:\Program Files\ANSYS Inc\ANSYS Student\v211\commonfiles\configs\winx64\config\AnsConfigANSYS.exenRunning C:\Program Files\ANSYS Inc\ANSYS Student\v211\commonfiles\configs\winx64\config\AnsConfigAQWA.exenRunning C:\Program Files\ANSYS Inc\ANSYS Student\v211\commonfiles\configs\winx64\config\AnsConfigCFX.exenConfiguring ANSYS Viewer ...nRunning C:\Program Files\ANSYS Inc\ANSYS Student\v211\commonfiles\configs\winx64\config\AnsConfigSpaceClaim.exenConfiguring ACP ...Running C:\Program Files\ANSYS Inc\ANSYS Student\v211\commonfiles\configs\winx64\config\AnsConfigACP.exenConfiguring Help ...Running C:\Program Files\ANSYS Inc\ANSYS Student\v211\commonfiles\configs\winx64\config\AnsConfigHelp.exeANSYS Internet Doc has been configured.nRunning C:\Program Files\ANSYS Inc\ANSYS Student\v211\commonfiles\configs\winx64\config\AnsConfigCHEMKIN.exenRunning C:\Program Files\ANSYS Inc\ANSYS Student\v211\commonfiles\configs\winx64\config\AnsConfigFORTE.exenConfiguring EnSight ...Running C:\Program Files\ANSYS Inc\ANSYS Student\v211\commonfiles\configs\winx64\config\AnsConfigEnsight.exenRunning C:\Program Files\ANSYS Inc\ANSYS Student\v211\commonfiles\configs\winx64\config\AnsConfigFENSAP.exenRunning C:\Program Files\ANSYS Inc\ANSYS Student\v211\aisol\..\commonfiles\CAD\bin\winx64\Ans.CadInt.CADConfigurationUtility.exenLog files is C:\Program Files\ANSYS Inc\ANSYS Student\v211\CADConfigLogs\Latest\CADConfigurationMgr.logMessageLogger.logFilePath is C:\Program Files\ANSYS Inc\ANSYS Student\v211\CADConfigLogs\Latest\CADConfigurationMgr.logErrorLogger.errorFilePath is C:\Program Files\ANSYS Inc\ANSYS Student\v211\CADConfigLogs\CADConfigurationMgr.errPrerequisites ..... Configure SuccessSC Workbench PlugIn ..... Not ConfiguredThe installation completed with warnings/errors. Review any .err or .log files in:nC:\Program Files\ANSYS Inc\ANSYS StudentnnInstallation Complete: Sat Feb 20 19:58:54 2021n<---------------------------------------<<