Thanks for your reply @
nchode. As desired, I have attached a screenshot of inductor windings (File name - IND_wdg) which has 'n' turns of the copper coil in 3 layers. I wish to assign the voltage of each turn in the winding to a specific value. However, with the increase in the number of turns of the inductor, it becomes a tedious process to assign them individually. Currently, I have defined variables (eg v11, v12, v13, and so on) for each voltage assignment for these coils as shown in the File name - wdg_prop. Would there be any other approach to assign voltage excitation to them?. nThanks.!n
You are navigating away from the AIS Discovery experience