January 6, 2021 at 11:24 am
johnfides
Subscriber
Hi In my model, I have actually defined a force parameter for only 2 groups, not for all sections as below. I select each section one by one and apply current. my current is 9kA. my setup;(eddy current solver)
max number of passes: 20
percent error: 0.01
refinement per pass: 30
min number of passes: 2
min converged passes: 1
solver: 50 Hz
nonlinear residual: 0.0001
freq sweep;
start: 10 Hz
stop: 1000Hz
step: 10 Hz
I assigned boundary as a vector potantial value:0, Phase:0