To simulate transient starting performance, we have to build speed and current closed loop control, or can manually define ramping speed and current related to this speed.
We could also use VM_ROTB (angular speed) or SM_ROTB (position) to calculate or get rotor position and then determine current by suing the position.
We may have some references, such as IEEE papers "Modelling of Switched Reluctance Motor Drive based on Ansys Simplorer" and "Performance Analysis of Switched Reluctance Motor Based on Maxwell and Simplorer", etc.
Please Login to Report Topic
Please Login to Share Feed
New Post - Reply To: Maxwell Simplorer co-simulation with rotational speed value increasing from zero to maximum
You are navigating away from the AIS Discovery experience