June 8, 2021 at 1:27 am
ronaona
Subscriber
Hello Sir,
Thank you for the comment. I was applied both methods(flexible and apdl) at the top surface .
Measure_pilot=_npilot
____________________________
my_rotx=ROTX(Measure_pilot)*57.29577951
my_roty=ROTY(Measure_pilot)*57.29577951
my_rotz=ROTZ(Measure_pilot)*57.29577951
I got the following Results
APDL
Flexible Rotation Probe

is there any reason about the difference using different methods?
Do I need to change anything? I already create a different coordinates and I select each result with respect to that coordinate.
or how can I get the real rotational angle.?


Thank you...