Thanks for any assistance you can provide. I checked the result summary and all the data is reading zero for the springs as shown below. When i inputed the user result for SMISC1 there are results as shown below
As you stated this is for force as shown below but obviously is not showing anything in the probe. Also the force in the spring in the y-direction is correct as shown (300000N) in the first snippet of results below with shome shear force apparent in both the X and Z directions, -640.848N and 43.698N respectively.
Please Login to Report Topic
Please Login to Share Feed
New Post - Reply To: Issues using COMBIN39 elements
You are navigating away from the AIS Discovery experience