Hi
Using the value of 130MPa with 0 plastic strain makes the plot look better, but now ansys will stablish the yield strenght of material at 130 Mpa instead of 260 won't it? I am a little bit lost...
I was using ASME 2015
Using the value of 130MPa with 0 plastic strain makes the plot look better, but now ansys will stablish the yield strenght of material at 130 Mpa instead of 260 won't it? I am a little bit lost...
I was using ASME 2015
You are navigating away from the AIS Discovery experience