Ch Qian
Subscriber

I am using ansys fluent to simulate the catalytic oxidation of co on a pt surface. I uploaded the kinetic file and the thermodynamic file. But ansys always reports an error and shows that it can't be uploaded. So I would like to ask if there is a syntax error in my files or because the version is too low. I am using ansys 18.0. Can anyone tell me is there anything wrong with my file?

 

Here is my reaction mechanism document.

REACTIONS MWOFF KJOULES/MOLE   
O2 + (Pt) => O2(Pt)                           5.000E-02  0.000      0.000 
    STICK 
O2(Pt) => (Pt) + O2                           5.243E+11  -0.069     19.573 
O2(Pt) + (Pt) => O(Pt) + O(Pt)                8.325E+13  -0.000     39.933 
O(Pt) + O(Pt) => O2(Pt) + (Pt)                4.444E+21  0.000      264.067 
    COV / O(Pt)                               0.000E+00  0.000      -88.200 / 
CO + (Pt) => CO(Pt)                           8.400E-01  0.000      0.000 
    STICK 
CO(Pt) => (Pt) + CO                           7.635E+12  -0.139     143.145 
    COV / CO(Pt)                              0.000E+00  0.000      -29.300 / 
CO2 + (Pt) => CO2(Pt)                         3.193E-03  -0.035     2.686 
    STICK 
CO2(Pt) => (Pt) + CO2                         1.894E+10  0.139      21.855 
CO(Pt) + O2(Pt) => CO2(Pt) + O(Pt)            4.124E+13  0.069      9.494 
    COV / O(Pt)                               0.000E+00  0.000      44.100 / 
CO2(Pt) + O(Pt) => CO(Pt) + O2(Pt)            2.910E+23  -0.069     272.506 
    COV / CO(Pt)                              0.000E+00  0.000      29.300 / 
CO(Pt) + O(Pt) => CO2(Pt) + (Pt)              4.764E+13  0.069      101.361 
    COV / CO(Pt)                              0.000E+00  0.000      -29.300 / 
CO2(Pt) + (Pt) => CO(Pt) + O(Pt)              6.297E+20  -0.069     140.239 
    COV / O(Pt)                               0.000E+00  0.000      44.100 / 
END