thank you SRP for your suggestions, in regards to ''patch'' already i do that. The main problem is:
Ammonia liquid enter the evaporator at T=25C and P=25bar, the presence of Hydrogen (inert gas) there is to allows ammonia to evaporate. Whene Ammonia become in contact with Hydrogen, supposed its partial pressure and temperature drops to P=1bar and T=-33C (saturation temperature) respectively and the evaporation begin. The question how to do that in Ansys Fluent With these BC.
Please Login to Report Topic
Please Login to Share Feed
New Post - Reply To: Evaporation of Ammonia
You are navigating away from the AIS Discovery experience