Sneh Patel
Subscriber

I got the deformed geometry from static structural by exporting 1) as STP file format and 2) as pmdb format.

1)STP format: I imported STP format file in new geometry module and bridged it to HFSS in the workbench. However, the geometry gets distorted in both Design modular and HFSS. I have attached pictures below.

2)PMDB format: I imported PMDB format file in new geometry and bridged it to HFSS in the workbench. However, I get an error when opening the HFSS design geometry.

Erik, I would really appreciate it if you can help me get this deformed geometry in HFSS as I have tried multiple approaches. Can I send you my files?

Picture 1: Imported deformed geometry(0.1mm nodal displacement) in new Design Modular -PMDB format

Picture 2: Imported deformed geometry(0.1mm nodal displacement) in new Design Modular -STEP format

Similar distorted geometry in HFSS with STEP format.

Picture 3: Error when opening HFSS geometry with PMDB file format.

Thank you,