Brief overview before the simulation result. I have created a cell register for the liquid film (phase2), and I have performed the patching of volume fraction of phase2 for that cell register = 0.99.
During standard initialization I have set the volume fraction for phase 2 equal to 0, and I have stopped simulation after 10 us (taking into account the number of time steps and time step size), so this is why the liquid film (with a height of 99 um) could not reach the outlet. The inclination of the channel has been set through the value of g vector.
Can you please let me know which would be the other information/results which I should provide? Thank you very much in advance!
Please Login to Report Topic
Please Login to Share Feed
New Post - Reply To: Divergence – Mixture Multiphase model with Surface Tension Force Model enabled
You are navigating away from the AIS Discovery experience