I browse the porous media in Chapter 7 cell zone and boundary condition. the porous media is set as stationary and the reaction flow passes through it.
I don't think this is a proper way to simulate an entrained flow combustor with coal and biomass particle. this method could only simulate a certain time point scenario, and can't reflect particle status at different locations of the combustor. Am I interpreting it correctly?
Thank you for your reply.
Please Login to Report Topic
Please Login to Share Feed
New Post - Reply To: How to tweak DPM model to model a large reaction particle like d=5mm cylinder
You are navigating away from the AIS Discovery experience