I am asking if using the model as is with FDTD as provided on the example. i run the example. I obtain the new design with litho effect through the script provided in the example. actually once I got this gds file with litho effect, then how to obtain the transmission spectrum? the example as is, is capable to do that or I should develop my own in separate project to obtain those results. The script sweeping the corrugation provide figure for bandwidth versus corrugation and band gap center versus corrugation. I think the example is capable to provide transmission versus wavelength but I don't know how.
if the example is capable to do that could you please guide me to do it.
Please Login to Report Topic
Please Login to Share Feed
New Post - Reply To: Bragg grating reflector: Photolithography simulation of WBG
You are navigating away from the AIS Discovery experience