Hello
Praneeth,
thank you for the response.
Regarding ” information about my simulation”
Q 1
I have attached a picture of the model which consists of electrodes.
there is a gap i between the electrodes which is filled with polymer composite.
I want to find out the “dielectric break down strength”(voltage at which the material disintegrates)
Q2
I also want to find the resistance offered by any material when it is placed in a cricuit.
”Ansys tools”
I have latest available student versions of ANSYS and ANSYS ELECTRICAL.
As per my research in internet
simulation to find the resistance is done with “electrical” in “ansys Work bench”
and
simulation to find the dielectric break down strength is done in ANSYS MAXWELL
I AM NEW TO THESE TWO PLATFORMS.
green rod like structures are electrodes.
rest of the part in blue color polymer composite material.
You are navigating away from the AIS Discovery experience