Hello Ashish,
Thank you for your prompt reply. Actually I didnt do anything that as you mentioned. I tried to find burst pressure for the pressure vessel I defined damage model only. I saw this post on this platform and I tried it. But I am not totally sure of the results and I thougt if I do this analysis for Type-5 tank maybe it gives similar result.
https://forum.ansys.com/forums/topic/how-to-find-burst-pressure-of-a-pressure-vessel-in-ansys/
I will try your mentioned steps again.
Regards,
Mert
You are navigating away from the AIS Discovery experience