I get this warning: Not all components were written out, as some violate the Mechanical APDL naming convention.
And if I look into the solution information, I get these 2 warnings:
*** WARNING *** CP = 1.906 TIME= 09:57:30
Element shape checking is currently inactive. Issue SHPP,ON or
SHPP,WARN to reactivate, if desired.
*** WARNING *** CP = 4.703 TIME= 09:57:32
Coefficient ratio exceeds 1.0e8 – Check results.
What can I learn from these and how can I get correct solutions?
You are navigating away from the AIS Discovery experience