Hi
For Maxwell 3D to Mechanical you can only transfer the electromagnetic forces to a Static Structural system (stress analysis only has displacement degress of freedom, not magnetic and electric, so we can not transfer the last 2, only forces we transfer) to look at stresses, or transfer electromagnetic losses to thermal analysis to calculate the resulting temperatures due to these losses.
See here for some appliccations.
https://www.ansys.com/products/electronics/ansys-maxwell
One drags and drop the solution cell from Maxwell to the Static Analysis Setup or Thermal Analysis Setup cell in order to do the above mentioned transfers.
All the best
Erik
You are navigating away from the AIS Discovery experience