https://drive.google.com/file/d/12h69cUXq0yXrgRukDrF9lB3PvO41CzK-/view?usp=sharing
yes. i open workbench ,make static structural(something very basic,a roller fixed on one end and force on other end). mesh works good. for solution i put basic total deformation. then i press solve. solver goes to 10% and i get this error message.
https://drive.google.com/file/d/12h69cUXq0yXrgRukDrF9lB3PvO41CzK-/view?usp=sharing
You are navigating away from the AIS Discovery experience