Sure. I have attached a photo of how I defined the model. I experimented using multilinear isotropic hardening but I was unable to get the model to run. I summarized the experimental data with just a few data points, but I increased the strain dramaticaly to make sure the solution was actually nonlinear and not just following the modulus. I am new to ANSYS so I do not know how to properly work the plots. I made the stress-strain curve and attached it, but I can only plot max and mins. The average stress of the solution was 456,440 psf and the average strain was 0.062 in/in.
You are navigating away from the AIS Discovery experience