José Mantovani
Subscriber

It's very nice Rahul. I will study about it, thanks for the suggestions Maybe the LES approach, If I want do it, I need a better computer because the results with a low time flow is not good. As I said, I make first, the RANS approach in way to converge the experimental data with my numerical results from a BFS simulation with geometry and boundary conditions by the Jovic and Driver experimental study. I have some doubts about the reference values, my results of Cf and Cp did not converge with experimental data.


I will create a thread here in ANSYS Community in somehours with my doubts, because this can help me and other user's to how validate a CFD simulation using RANS approach. I'm write this...


I hope your help guys!


Thanks.