DEFINE_SDOF_PROPERTIES(projectile, prop, dt, time, dtime)
prop[SDOF_MASS] = 0.5;
prop[SDOF_IXX] = 0.0;
prop[SDOF_IYY] = 0.0;
prop[SDOF_IZZ] = 0.0;
printf ("nprojectile: updated 6DOF properties");
Will this UDF enough to move the the above mentioned model?
In the dynamic mesh panel, for which part i should consider rigid body?
I considered interior-inner-domain as rigid body and interior-inner-domain-outer-domain as rigid body but its still not moving showing error?
Please Login to Report Topic
Please Login to Share Feed