Create a new material in Engineering Data, provide at least Isotropic Elasticity and a SN curve from the available models under the Life category.

Create Geometry in a CAD system or in DesignModeler or SpaceClaim.

Use a Static Structural analysis to support and load the model.

Mesh and Solve the model.  Refine the mesh until the stress results have converged.

Adjust the load until the stress is equal to 36 MPa.

Add a Fatigue tool and Insert Life.

In the Details window of the Fatigue tool, set the Load Ratio to 0.1


Please delete your post in the other Discussion..