February 15, 2021 at 10:05 am
klara.marek
Subscriber

Hello Naresh Patre

thank you for taking the time to look into this. However I am still wondering why you could obtain any results while my simulation wouldn't start at all.

 

As to the results of the simulation: In case one my flow rate is 0.0021684kg/s which should result in an average velocity of velocity = flow rate/ density/ area = 5.2m/s (Ma=0.015<<0.3). Even with turbulent flow I cannot understand how the max. result can be in the order of e7. Any ideas? 

Thanks again!