September 29, 2020 at 5:10 am
Charudatta Bandgar
Subscriber
Hello Koncz CFD , To use the sweep tool with an axis, follow the below-mentioned steps
  1. Click Pull   in the Edit group on the Design tab.
  2. Select the object you want to sweep.
  3. Alt+click the primary trajectory (your main trajectory which the object will follow).
  4. Ctrl+Alt+click the secondary trajectory (the axis, with which the orientation is changed to maintain the profile normal).
 
🛈 This post originally contained file attachments which have been removed in compliance with the updated Ansys Learning Forum Terms & Conditions