Hi Subashni
In the sample file if I set my maximum stress target to 1MPA all the areas in red in the image below are above 1.1MPA when I changed my legend.
All the red areas are over my 'Maximum Stress' target that I set.
On the same sample I set my maximum target to 0.5Mpa and the legend to 0.6 to allow for a bit of room and all red areas are over and the max is 3Mpa
Seems like it could be a really good feature, just struggling to work out the best way to utilise it.
You are navigating away from the AIS Discovery experience