关于收敛测试的问题
-
-
我在用案例metalens进行仿真时，为了我更好比较，我先用官网案例的设置去得出相位和透射率，之后我按照处理发散的帖子将相应选项改为stabilized后，从status上来看确实没有发散，但我得出的相位值和透射率的值和先前不改变设置的相位和透射率之间有差值，在这种情况下我该使用哪种PML设置，我这种比较方法是否正确，以及我该在什么情况下才改变设置，是只有出现发散后才可以进行发散设置吗？再次期待您的回答
Viewing 1 reply thread- The topic ‘关于收敛测试的问题’ is closed to new replies.
Ansys Innovation Space
SimACE-23
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
Trending discussions
Top Contributors
-
Rob
-
Guilin Sun
-
peteroznewman
-
Ashish Khemka
-
Erik Kostson
Top Rated Tags
-
You are navigating away from the AIS Discovery experience