Photonics

Photonics

1:2 coupler in Lumerical Interconeect

    • memar
      Subscriber
      Hi,
       
      I'm using the Lumerical Interconnect to simulate my design at the circuit level. In my design, I have a 1:2 coupler. In other words, this coupler divides the input power into 1/3 and 2/3 ratios. How can I make this coupler using the "Waveguide Coupler" element in Lumerical Interconnect?
       
      Best,
    • Guilin Sun
      Ansys Employee

      I just found your post which is in the wrong forum. Lumerical has dedicated English, Chinese and Korean forums:

      https://forum.ansys.com/forums/forum/discuss-simulation/photonics/

      https://forum.ansys.com/forums/forum/discuss-simulation/photonics/photonics-chinese/

      https://forum.ansys.com/forums/forum/discuss-simulation/photonics/photonics-korean/

      Next time please post in the proper forum in order to get quick reply.

      A short reply is: simple change the "coupling coefficient".

      https://optics.ansys.com/hc/en-us/articles/360036618733-Waveguide-Coupler-C-INTERCONNECT-Element

Viewing 1 reply thread
  • You must be logged in to reply to this topic.