3D Design

3D Design

19.1 to 18.2

    • Don18
      Subscriber

      Hello!


      Is there any way or is it possible for me to import my geometry which was created using ANSYS 19.1 to 18.2?


       

    • Naresh Patre
      Ansys Employee

      Hello Don18,


      Backward compatibility is not available. However, you may try exporting the model in neutral file formats like stp, parasolid and import it in earlier versions.

    • Keyur Kanade
      Ansys Employee

      Yes, backward compatibility is not available. 


      If you are using DM, then please export model using File --> Export. Please use parasolid (*x_t) format. 


      if you are using SpaceClaim, then you can export mode in step or iges format. 


      There are many other neutral formats. But these formats seem to be better than others. 


      Regards,


      Keyur

    • Don18
      Subscriber

      Can I do the same for the model as well?

    • Keyur Kanade
      Ansys Employee

      Do you mean ANSYS file?


      Regards,


      Keyur

    • Don18
      Subscriber

      Yes,instead of importing the geometry only form 19.1 to 18.2, can I also import the model?

    • Keyur Kanade
      Ansys Employee

      I am not sure. Can you please make this as Is Solution for geometry and log a new question under Structural Mechanics category where you will get better response on ANSYS. 


      Regards,


      Keyur

Viewing 6 reply threads
  • You must be logged in to reply to this topic.