May 17, 2023 at 3:44 pmNicola MengaSubscriber
It is possible to perform a 2 way FSI simulation in steady-state?
I'm trying to do it, but I'm not ure it is correct.
Attached is a screenshot showing the setting I'm using.
Is the same I use for 2 way FSI in transient, but with the "Static structural" box replacing the "Transient structural" one.
Thank you. 😀
May 18, 2023 at 12:05 pmFederico Alzamora PrevitaliSubscriber
yes, that is definitely possible. Are you getting any errors or warnings?
May 18, 2023 at 1:16 pmNicola MengaSubscriber
Thank you for your reply.
I have recently completed an analysis and I have not received any errors. Furthermore, comparing the results of the fluid part with those obtained from a purely fluid dynamics simulation, they are similar. So I suppose that the setup I have used should be fine.
May 18, 2023 at 1:23 pmFederico Alzamora PrevitaliSubscriber
Excellent! Feel free to come back here if you have any questions or face any issues
May 18, 2023 at 1:45 pmNicola MengaSubscriber
Thank you ✌
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- The solver failed with a non-zero exit code of : 2
- Difference between K-epsilon and K-omega Turbulence Model
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error: Received signal SIGSEGV
© 2023 Copyright ANSYS, Inc. All rights reserved.