Discovery Import

Discovery Import

2021 R1 Discovery Monitor Problem

    • kin

      Hi Support,


      I used the Pressure monitor to measure the pressure, but it failed with a warning message "select one or more faces on a wall or flow location for Avg. Total Pressure 43 (1 face)".

      How can I measure the pressure of the face?



    • Subashni Ravichandran
      Ansys Employee

      Hello Kin

      In the Fluid simulation, the selected face needs to be defined as a Wall/inlet/outlet. Can you please check if the highlighted face is defined as a Wall?

      • kin

        Hi Subashni 

        As you mentioned that it has to be set as Wall or flow condition, I finally got the results.

        Thank you for your helpful response.

Viewing 1 reply thread
  • You must be logged in to reply to this topic.