November 12, 2018 at 6:56 pmRizwanSubscriber
For generating a mesh of three equal element size of a rectangular geometry having length 3 meter and breadth 1 meter, I used edge sizing twice for horizontal and vertical boundaries.Thereafter I went for face sizing with element size 1m but am unable to see any mesh on the rectangular face.Kindly advise.
November 12, 2018 at 7:35 pmKarthik RAdministrator
Could you please share the error message from ANSYS meshing? It is hard to make out from your screenshot.
November 13, 2018 at 12:30 ampeteroznewmanSubscriber
Click on the Edge Sizing mesh control and look in the Details window. There is a row called Behavior. The default is Soft, which means the mesher takes the number of elements as a suggestion that it can ignore. Change the Behavior to Hard and the mesher will respect the Edge Sizing input.
November 13, 2018 at 1:42 amRizwanSubscriber
I am always using the ‘hard’ behaviour.Something else is being missed out.
November 13, 2018 at 1:53 amRizwanSubscriber
‘A mesh control is not associated to any geometry’
November 13, 2018 at 3:06 amKeyur KanadeAnsys Employee
Can you please insert some zoomed in images for your controls.
Please make sure that you use no. of divisions in edge sizing. Please use same no. of divisions on opposite edges.
November 13, 2018 at 3:29 amAniketAnsys Employee
I am unable to see the details for all the methods that you are using but I would do this with following 3 local sizings:
November 13, 2018 at 3:48 pmRizwanSubscriber
- You must be logged in to reply to this topic.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- ANSYS Workbench Measuring within Design
- how to improve the inflation quality at sharp corners?
- check element type
- The mesh file exporter could not resolve cyclic dependencies in overlapping contact regions error
- How to resolve Mesh Failure
- Meshing Error
- Error in meshing
- Conformal vs Non-Conformal Mesh
- execution error inside the mesher. The process suffered an unhandled exception or ran out of memory
- inflation created stairstep mesh at some location
© 2023 Copyright ANSYS, Inc. All rights reserved.