June 14, 2020 at 7:25 amAravindReddySubscriber
Can anyone help me in improving the mesh quality. I have attached the blocking, mesh and mesh quality screenshots below. I have tried using the smooth meshing tool,but it didn't work. My Domain is a C grid of 3m in z direction. The airfoil width is 1m which is at the center of
June 15, 2020 at 10:47 amRobAnsys Employee
The blocking looks about right, and follows most of the classic tutorial examples. Have a look at the cell size and think why you're getting cells of poor quality in those regions: what's happening to those cells?
June 15, 2020 at 3:06 pmAravindReddySubscriber
There are some 600 bad elements which have a bad angle of less than 18 degrees. How can I improve the angle of elements at the block corners?
June 17, 2020 at 10:48 amRobAnsys Employee
You may need to change the angle of the blocks or review the local sizing.
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- how to improve the inflation quality at sharp corners?
- ANSYS Workbench Measuring within Design
- check element type
- The mesh file exporter could not resolve cyclic dependencies in overlapping contact regions error
- How to resolve Mesh Failure
- Meshing Error
- Error in meshing
- Conformal vs Non-Conformal Mesh
- execution error inside the mesher. The process suffered an unhandled exception or ran out of memory
- inflation created stairstep mesh at some location
© 2023 Copyright ANSYS, Inc. All rights reserved.