February 18, 2021 at 7:34 amUzairsainSubscriberFebruary 18, 2021 at 1:10 pmKarthik RAdministratorHi,nThe two things I would check would be your energy balance and simulation convergence. nAlso, the plot is not sharp. This tells me that your mesh is very coarse. You might want to refine it a bit. nWhat material properties are you using for your cells?nKarthiknFebruary 18, 2021 at 1:52 pmUzairsainSubscriberAluminum is the material for cellsnnFebruary 18, 2021 at 2:07 pmYasserSelimaSubscriberI am assuming this is a 3D simulation. Am I correct?.This could be justified by the turbulence. Similar to what happens in heat exchanges where the convection coefficient of heat transfer increases until the 3rd row of tubes.nAnyway, you have to refine the mesh around. and between the cells to confirm the results.February 18, 2021 at 2:11 pmYasserSelimaSubscriberCan you show the velocity vectors between any two cells. I am interested to see how it look like.nMarch 2, 2021 at 5:49 pmUzairsainSubscriberyes sir this is 3d simulation .thanks to everyone for their comments and it was helpful to menMarch 2, 2021 at 9:20 pmKarthik RAdministratorYou're welcome!nMarch 2, 2021 at 10:14 pmYasserSelimaSubscriberYou are welcome!nViewing 7 reply threads
Ansys Innovation Space
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.Trending discussions
- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- Difference between K-epsilon and K-omega Turbulence Model
- The solver failed with a non-zero exit code of : 2
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error: Received signal SIGSEGV
Top Rated Tags
© 2023 Copyright ANSYS, Inc. All rights reserved.Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.