April 25, 2018 at 1:13 pmRosarioAnsysSubscriber
I have a problem in the module "Explicit Dynamic" I have the error that I run a calculation:
"A general failure occurred during the solution process"
I want to clarify that I have Ansys version 18.2, that my model has no problem see this topic: https://forum.ansys.com/forums/topic/material-shear-subjected-to-a-temperature/
April 25, 2018 at 3:12 pmpeteroznewmanSubscriber
This error has nothing to do with your installation. It only has to do with your model. We can discuss that in your thread.
April 26, 2018 at 7:23 amRosarioAnsysSubscriber
Hello, I managed to solve the problem by going through the student version of ansys which is in 19.0.
It's odd that I can simulate the student version and not the company version I have.
I found a temporary solution while waiting for my company version to be upgraded.
July 8, 2020 at 11:37 amsamsatchSubscriber
have anyone found another solution, im having the same problem
July 9, 2020 at 8:28 pmtsiriaksAnsys Employee
Please create a new thread, post the screenshot of the issue, provide version you are using and the installation package you used.
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Error with workbench SceneGraphChart
- License Error
- Sizing on Ansys Workbench 19.2
- Error: Exception of type ‘Ansys.Fluent.Cortex.Cortex not availableException’ was thrown
- how to open DesignModeler
- FlexNet Licensing – Not running
- Problem with FlexNet Licensing
- An error occurred when the post processor attempted to load a specific result.
- Ansys2021R2 ansys212 seg faults immediately on RHEL8.2
- Numerical Problem Size limits with a model that should run
© 2023 Copyright ANSYS, Inc. All rights reserved.