July 16, 2022 at 3:02 pmmkhademiSubscriber
I am using Ansys Rocky for simulation of particles passing a cylinder. I used steady state solution of Fluent, and the coupling is one way. When particles are released from a surface upstream of the cylinder, the particles stop travelling from half of the cylinder. I have attached the image here. Thank you for any suggestion.
July 16, 2022 at 9:04 pmmkhademiSubscriber
Thank you all guys. I found the problem. It was related to settings of boundary conditions.
July 18, 2022 at 10:49 amRobert WoolhouseAnsys Employee
Thanks for the update.
July 21, 2022 at 12:05 pmDrAmineAnsys Employee
- You must be logged in to reply to this topic.
Simulation World 2022
Check out more than 70 different sessions now available on demand. Get inspired as you hear from visionary companies, leading researchers and educators from around the globe on a variety of topics from life-saving improvements in healthcare, to bold new realities of space travel. Take a leap of certainty and check out a session today here.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Heat transfer coefficient
- What are the differences between CFX and Fluent?
- Floating point exception in Fluent
- Difference between K-epsilon and K-omega Turbulence Model
- Time Step Size and Courant Number
- The solver failed with a non-zero exit code of : 2
- Exporting Data Results
- Floating point exception