Preprocessing

Preprocessing

Topics relate to geometry, meshing, and CAD

A software execution error occurred inside the mesher. The process suffered an unhandled exception.

    • daveberutu
      Subscriber

      Hello Everyone

      I want to meshing my tubing model in shell mode with dimension at below:
      length : 1550 ft


      thickness : 0.00625"


      outer diameter : 0.375"

      "A software execution error occurred inside the mesher.  The process suffered an unhandled exception or ran out of usable memory" always display when i do meshing.

      I've tried using edge sizing and face sizing and it only works for 500inch tube length and it's very frustated that my actual model's length up to 1550 ft.

      I really really need your help because this model's deadline is on next week.


      Thank you


      your help will be much appreciated.

    • peteroznewman
      Subscriber

      Dave, please don't post duplicate Discussions.  I answered this question in another discussion.

    • TateCollins
      Subscriber
      Hi Peter,
      Can you check the link on that last comment please. I get a 404 error.
      Cheers
    • peteroznewman
      Subscriber
      Array
      There are many broken links since the site was upgraded.
    • arvindp
      Subscriber
      .

      could you answer again then, mr. peter? we are not able to access it

      .
    • peteroznewman
      Subscriber
      .

      arvindp

      The broken links are not being repaired. I suggest you start a New Discussion to ask a question.

      .
Viewing 5 reply threads
  • You must be logged in to reply to this topic.